腾晖光伏发布功率达590瓦的新组件

发布于 2020年8月7日
苏州腾晖光伏技术有限公司 
Talesun Solar launched latest super power PV module with larger wafer of 182, the BISTAR PRO series, via an online release. 

The BISTAR PRO series which utilized bigger wafer with size of 182mm, include two models. The type of 72 pcs is with power output more than 545 W, and the one of 78 pcs reaches 590 W in output. Talesun said the products' design has considered the industrial chain supporting from upstream to downstream and secured the compatibility to those from raw material supply, production process, equipment to transportation and terminal application.

A series of advanced technologies have been applied to the BISTAR PRO series. With the larger wafer size, the PV modules achieve higher power output and provide significant reduced system cost for end users. According to careful calculation based on experimental installation, the balance of system (BOS) will decrease by up to 4.4% and the levelized cost of electricity (LCOE) will drop by around 3%, compared with conventional modules.

The mature multi bus bar (MBB) technology has been utilized to reduce the internal loss and crack risk. And with special designed solar cell process and optimized configuration module production, the BISTAR PRO series obtains excellent protection mechanism against the potential induced degradation (PID) phenomenon which is greatly affective to system power efficiency.

Meanwhile, R&D Team has developed unique advanced control technology attached to the M10 Ga doped wafer to ensure very low LID and LeTID attenuation. We provides guarantees for less than 2% attenuation in the first year and no more than 0.55% and 0.45% annual degradation for single-glass and dual-glass types, respectively.

To meet more and more complicated installation environment, we improved the design of PV module frame structure which enhanced the loading capability of the module. The load performance on the front surface of BISTAR PRO module is up to 5400 Pa and 2400 Pa for the back side.

Mr. William Sheng, Our President of Talesun Solar, said:"Talesun sees a high compatibility of BISTAR PRO series modules to current industry chain. Including production processing, equipment, packing, transportation and terminal application are all ready to go with the production of these new modules. Talesun is vigorously promoting the construction of its smart module production base locates in Shandong Province, which is with total capacity of 3 GW and compatible with the new BISTAR PRO series. The commissioning and mass production of this facility is estimated to start since Q4, 2020."


来源: Talesun
以上新闻中相关公司单个页面

苏州腾晖光伏技术有限公司 (光伏组件): https://www.enf.com.cn/苏州腾晖光伏技术有限公司
苏州腾晖光伏技术有限公司 (光伏系统安装): https://www.enf.com.cn/苏州腾晖光伏技术有限公司
光伏新闻是免费发布的,请发送您的新闻到