太阳能材料
(504 个材料)

• Export the electrical energy generated by the solar module through the cable.

• The built-in diode can prevent the risk of hot spots in the photovoltaic module.

• Provide a secure connection between the solar panels and the rest of the system.

1. Superior Anti-PID performance

2. Low CTM Loss Rate,more suitable for high-power module

3. High bifaciality,relative conversion efficiency ≥92% under low light(200W/m²)

4. High cell conversion efficiency,front efficiency≥25.5%,Bifacial rate≥80%

5. Low decay and Low LID rate

6. Excellent mechanical characteristics

● Positive power tolerance of 0~3% improves system performance

● Industry leading Module efficiency: Max efficiency 22%

● Tested up to 5400 Pa for Maximum load resistance

● Verified resistance against PID effects

● Progressive Power warranty guarantees 80.2% of rated power at 25 Years

● Manufactured globally with world-class quality standards

• Advanced TOPCon technology for higher efficiency

• Improved passivation and doping reduce power loss

• 16 busbars for better light capture

• Excellent low-light performance

• Very low light-induced degradation (LID)

• High weather resistance and durability

• Stable sealed power output

• High Efficiency N-Type and TOPCon technologies

• Improved passivation and doping for lower power loss

• Ultra-large 210 mm wafers deliver Increased power density

• 16 busbars for better light capture

• Excellent low-light performance

• Very low light-induced degradation

• High weather resistance

● High Conversion Efficiencies Resulting in Superior Power Output Performance

● Outstanding Power Output Even in Low Light or High Temperature Conditions

● Optimized Design for Ease of Soldering and Lamination

● Long-term Stability, Reliability and Performance

● Low Breakage Rate

● Uniform Color

1. Superior Anti-PID performance

2. Low CTM Loss Rate,more suitable for high-power module

3. High bifaciality,relative conversion efficiency ≥92% under low light(200W/m²)

4. High cell conversion efficiency,front efficiency≥25.4%,Bifacial rate≥80%

5. Low decay and Low LID rate

6. Excellent mechanical characteristics

• Export the electrical energy generated by the solar module through the cable.

• The built-in diode can prevent the risk of hot spots in the photovoltaic module.

• Provide a secure connection between the solar panels and the rest of the system.

• High Performance N-Type and TOPCon technologies

• Improved passivation and doping minimize power loss

• Ultra-large 210 mm wafers deliver higher power density

• 18 busbars for better light capture

• Excellent low-light performance

• Very low light-induced degradation

• High weather resistance

1. Superior Anti-PID performance

2. Low CTM Loss Rate,more suitable for high-power module

3. High bifaciality,relative conversion efficiency ≥92% under low light(200W/m²)

4. High cell conversion efficiency,front efficiency≥25.5%,Bifacial rate≥80%

5. Low decay and Low LID rate

6. Excellent mechanical characteristics

• High Voltage Capacity: Rated for up to 1500V IEC/UL

• Superior Protection: Achieves IP68 waterproofing and a flame-retardant rating of 5VA

• Wide Temperature Range: Engineered to perform in extreme conditions from -40°C to +85°C

• Flexible Current Options: Offers a variety of current ratings from 18A to 35A

• Ultra-fast cure and PID-resistant EVA.

• Designed for use in all photovoltaic devices.

• Short lamination cycle and excellent light transmission.

• Ideal for crystalline silicon modules.

• Smooth coating proportion, easier to solder

• Both lead ribbon and lead-free available

• Higher electrical conductivity and lower power consumption

• High-quality, neutral, and elastic single-component adhesive/sealant.

• Demonstrates good adhesion without primer to many substrates.

• Odourless and free of solvents, isocyanates, silicones, and PVC.

• High UV resistance.

• AR-Coated low-iron tempered glass

• Higher light transmittance of more than 93%

• Can tailor-made any smaller size glass according to request

• PERC plus SE Technology

• Higher efficiency to reach a maximum of 23.6%

• Uniform color on the front and back sides

1. High conversion efficiencies resulting in superior power output performance

2. Outstanding power output even in low light or high-temperature conditions

3. Optimized design for ease of soldering and lamination

4. Long-term stability, reliability and performance

5. Low breakage rate

6. Uniform color

• Extremely low power loss

• Low fragmentation

• High quality appearance & color uniformity

• Excellent weldability

• PID resistance

• Outstanding power output even in low light

• Stable performance for rooftop or underground solar system

• Superior Waterproof Seal: Ensures a tight, permanent, and flexible waterproof seal, even in extreme temperatures as low as -57°C (-70°F)

• Versatile Bonding: Adheres to a wide range of surfaces, including EPDM, TPO, aluminium, wood, concrete, and plastics

• Durable and Flexible: Boasting 700% elongation and pliability at -34°C (-30°F)