光伏组件产品名录
(12,487 组件系列 / 47,102 个组件)

N-Type Half-Cell Module

PID Resistance Excellent Anti-PID performance guarantee via optimized mass-production process and materials control.

Reduced Hot Spot Loss Optimized electrical design and lower operating current for reduced hot spot loss and better temperature coefficient

High energy generation, low LCOE

Low Pmax temp coefficient increases energy production

• High-power output with up to 25% bifacial gain from the rear side.

• Exceptional anti-pid performance from optimized production and quality materials.

• High efficiency with strong thermal performance.

• Reduced shading mismatch for increased power output.

S-Max™ series of PV modules are designed for commercial projects and large solar farms with highest power output for saving more than 15% of BOS.

1. Bifacial Cells.

2. Weight 38 kgs.

3. 30 years warranty.

High Efficiency 20%-23%

Wind/Snow Load 2400Pa/5400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature and high humidity areas

Using MBB higher efficiency 158.75mm Mono cell and half cell technology. Power can be 390w-420w. By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced. This design effectively deals with the mismatch happened between cells caused by shadow, out of sync performance degradation, etc.

• Exceptional Efficiency

• Lower Risk of Heat Spots

• Outstanding Performance in Low-Light Conditions

• Power Tolerance Range of 0-3%

• High Resistance to PID

• Endures Extreme Weather Conditions

• EVA encapsulated

• Glass foil sandwich laminated

• Sandblasted anodizing Aluminum frame

• IEC 5400Pa tested

• Hail up to 25mm diameter, 80 Km/h tested

• Wide temperature range of -40 to +85 ℃

• Nominal operating cell temperature (NOCT) of 47℃