光伏组件产品名录
(12,494 组件系列 / 47,048 个组件)

N-Type Half-Cell Module

PID Resistance Excellent Anti-PID performance guarantee via optimized mass-production process and materials control.

Reduced Hot Spot Loss Optimized electrical design and lower operating current for reduced hot spot loss and better temperature coefficient

High energy generation, low LCOE

Low Pmax temp coefficient increases energy production

Positive power tolerance (0 +5W) guaranteed

High module conversion efficiency (up to 21.0%)

Slower power degradation enabled by Low LID Mono PERC technology: first year <2%, 0.55% year 2-25

Solid PID resistance ensured by solar cell process optimization and careful module BOM selection

Reduced resistive loss with lower operating current

S-Max™ series of PV modules are designed for commercial projects and large solar farms with highest power output for saving more than 15% of BOS.

1. N-TOPcon Bifacial Cells

2. Weight 38 kgs.

3. Extra Backside Gains 10~30%

4. 30 years warranty.

● Positive power tolerance of 0~3% improves system performance

● Industry leading Module efficiency: Max efficiency 22%

● Tested up to 5400 Pa for Maximum load resistance

● Verified resistance against PID effects

● Progressive Power warranty guarantees 80.2% of rated power at 25 Years

● Manufactured globally with world-class quality standards

1. 0-+5W positive power tolerance
2. High module conversion efficiency
3. ISO9001:2008 quality management system
4. IEC 61215 & IEC 61730 standard quality
5. Fire safety Class C
6. Wind load up to 2400Pa / Snow load up to 5400Pa
7. 30-year performance warrant / 12-year product warranty

• High Efficiency

• Lower Heat Spot Risk

• Excellent Low-light Performance

• 0-3% Power Tolerance

• PID Resistant

• Resilient to Extreme Weather

S-Nano™ series of PV modules are designed for residential and small commercial installations with compact sizes and aesthetic appearances.

1. Mono facial / Black Framed

2. Super light only 20.7 kgs.

3. 25 years warranty.

Using MBB higher efficiency 166mm Mono cell and half cell technology. Power can be 430w-460w. By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced. This design effectively deals with the mismatch happened between cells caused by shadow, out of sync performance degradation, etc.