太阳能板
(12,549 组件系列 / 47,128 个组件)

• M Busbar Solar Cell

• High Efficiency

• PID Resistance

• Low-light Performance

• Durability Against Extreme Environmental Conditions

Positive power tolerance (0 +5W) guaranteed

High module conversion efficiency (up to 21.3%)

Slower power degradation enabled by Low LID Mono PERC technology: first year <2%, 0.55% year 2-25

Solid PID resistance ensured by solar cell process optimization and careful module BOM selection

Reduced resistive loss with lower operating current

• Energy density is increased by utilizing multi-busbar and half-cut technologies

• Overall module efficiency up to 21.7%

• Passed the test under conditions 3 times higher than the IEC standard

• 12-year material warranty, 25-year power warranty

• Certified for 2400 Pa wind load and 5400 Pa snow load

●最具创新性的太阳能公司之一

●美国团队研发

●ECA叠瓦技术，没有busbars,太阳能电池片可减少电流散热

●1500 V系统电压，BOS成本低

●更好的低光输出

●高功率输出

●抗风、雪压能力强

●耐盐，耐氨

●30年可靠的线性保修

• MBB and high-density interconnect technology improves power output and efficiency

• Advanced non-destructive cutting and half-cut technology offers superior mechanical performance

• +5W positive power tolerance

• Improved low light irradiance performance and low degradation

• Withstands 5400Pa snow & 2400Pa wind load

S-Nano™ series of PV modules are designed for residential and small commercial installations with compact sizes and aesthetic appearances.

1. Bifacial All Black with TOPcon Cells.

2. Super light only 20 kgs.

3. 30 years warranty.

• Positive power tolerance of 0~ 3% improves system performance

• Industry-leading module efficiency

• Tested up to 5400Pa for maximum load resistance

• Verified resistance against PID effects

• Progressive Power Warranty

• Fewer micro-cracks, PID resistant, and endure harsh conditions.

• SMBBfor trapping, lower resistance, better collection.

• Low LCOE, reduced BOS cost, quick payback. More harvest with N-type TOPCon. Compatible, efficient container use cuts freight.

• Power range from 555W to 575W

• High conversion efficiency up to 20.32%

• PERC technology & Anodized aluminum alloy frame

• 3.2-millimeter high-transmission tempered front glass

• Highly resistant to PID effects

• 12-year product warranty, 25-year linear power output warranty

• European brand certified by independent engineering bodies.

• Advanced HJT cells with bifacial power generation, higher yield per surface area.

• Anti-PID and anti-LID technology, and guaranteed mechanical resistance to severe weather conditions.

• 30 years limited product warranty.

• Advanced TOPCon technology

• Terracotta glass and frame design

• Ideal for red, orange and terracotta roofs

• Max. efficiency of 19.97%

• Super Multi-Busbar (SMBB) and Half-cut cell technologies

• Robust mechanical strength

• 12-year product, 25-year linear power warranties

• Bloomberg Tier 1 Brand

• HJT Technology

• Bifacial Power Gain

• Up To 23.34% Module Efficiency

• LID And PID Resistant

• High-Quality Materials, Best Workmanship, German Engineering

• 30-year Linear Performance, 15-year Product Warranty

• Advanced Half-Cut Cells

• Bifacial Power Gain Up To 15%

• Micro Gap Architecture

• Multi-Busbars

• Lower Internal Resistance

• High Mechanical Load: 5400 Pa Snow, 2400 Pa Wind Loads

• 15-Year Product, 30-Year Linear Power Output Warranty

High Efficiency 22%-23%

Wind/Snow Load 2400Pa/5400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature, and high humidity areas

1. PERC技术带来更高的组件转换效率（高达20.17%）

2.优化的生产工艺保证出色的PID抗性

3. 先进的玻璃和电池片表面纹理设计，确保在弱光环境下的出色表现

4. 经认证可承受：风载（2400 Pa）和雪载（5400 Pa）

5、耐盐雾、耐氨性高

• High energy efficiency of up to 21.51%

• Excellent performance even under low-light conditions.

• Enhanced PID protection minimizes power loss.

• Lightweight design for easier handling and installation.

144-cell monocrystalline panels can deliver 21.51% peak efficiency and up to 550 watts of power

Proven half-cut technology

Equipped with 144 half-cut solar cells

A fully automated state-of-the-art production line handles all the processes from soldering to framing

Advanced inspection devices - two electroluminescence testing

Premium materials and durable design

• N-type TOPCon Cells lower LID/LeTID degradation & improved low-light performance

• HOT 3.0 technology enhances reliability & efficiency

• Bifacial design delivers additional power yield from rear-side

• SMBB Cell design for better light trapping and current collection, delivering high power output

• Anti-PID

• Higher performance under low-light environments.

• Strict salt spray and ammonia corrosion test by a third party.

• N-type solar cell has very low LID naturally, which can reduce power degradation.