光伏组件产品名录
(12,478 组件系列 / 46,961 个组件)

High-quality the YH450 module series

The series has 4 models with a maximum power output of 450W and a peak efficiency of 20.7%

Equipped with 144 half-cut solar cells

Resistant to potential induced degradation effects

Passed salt mist, ammonia corrosion, and electroluminescence tests

Durable design - an anodized aluminium alloy frame and a 3.2mm tempered glass

- Tier1 brand

- CE, IEC61215 ＆ IEC61730/TüV, UL, ISO9001, CEC, and etc.

- Can bear snow loads up to 5400Pa and wind loads up to 3800 Pa.

- Guaranteed power output (0~+3)

- Passed PID Test, Fire Test, Salt Mist Corrosion Test and Ammonia Corrosion Test

• Advanced TOPCon Technology

• Elegant All-Black Design

• Up To 22% Maximum Efficiency

• Bifacial Power Gain

• SMBB Technology

• Half Cut Solar Cells

• Strengthened Mechanical Load

• 12-Year Product, 30-Year Linear Power Warranty

High Efficiency 20%-23%

Wind/Snow Load 2400Pa/5400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature, and high humidity areas

• Topcon technology for higher conversion efficiency.

• Excellent low-light performance.

• High bifaciality rate improves backside power generation.

• Superior PID resistance.

• Tier 1 solar panel brand

• n-type cells with reduced LID

• Up to 85% rear-side bifaciality

• 16 busbars for better current collection

• Half-cell layout for improved performance & shading tolerance

• Double glass module for enhanced durability

• <0.4% annual power degradation over 30 years

• HJT 2.0 Technology

• -0.26%/°C Pmax temperature coefficient

• SMBB design with Half-Cut Technology

• Up to 90% Bifaciality

• Sealing with PIB-based sealant

1. PERC技术带来更高的组件转换效率（高达20.17%）

2.优化的生产工艺保证出色的PID抗性

3. 先进的玻璃和电池片表面纹理设计，确保在弱光环境下的出色表现

4. 经认证可承受：风载（2400 Pa）和雪载（5400 Pa）

5、耐盐雾、耐氨性高

• High Efficiency

• Lower Heat Spot Risk

• Excellent Low-light Performance

• 0-3% Power Tolerance

• PID Resistant

• Resilient to Extreme Weather

• Higher performance under low-light environments.

• Strict salt spray and ammonia corrosion test by a third party.

• N-type solar cell has very low LID naturally, which can reduce power degradation.

• High-Efficiency Advanced TOPCon Cells

• Micro Gap Technology

• Bifacial Power Gain Up To %30

• Lower Internal Resistance

• 15-Year Product, 30-Year Linear Output Warranty

• Advanced HJT Technolgy

• N-Type Cells With 0 Busbars

• Bifacial Power Generation

• High Efficiency Up To 23.8%

• Zero PID And LID

• 30-Year Product And Linear Power Output Warranty

• Power range from 530W to 560W

• High conversion efficiency up to 21.68%

• PERC technology

• Anodized aluminium alloy frame

• 3.2-millimeter high-transmission tempered front glass

• Highly resistant to PID effects

• 12-year product warranty, 25-year linear power output warranty

• European brand certified by independent engineering bodies.

• Advanced N-type cells with back-contact technology, offering higher light conversion efficiency.

• Zero light-induced degradation and low Pmax temperature coefficient.

• 25 years limited product warranty.

• M Busbar Solar Cell

• High Efficiency

• PID Resistance

• Low-light Performance

• Durability Against Extreme Environmental Conditions

• MBB and high-density interconnect technology improves power output and efficiency

• Advanced non-destructive cutting and half-cut technology offers superior mechanical performance

• +5W positive power tolerance

• Improved low light irradiance performance and low degradation

• Withstands 5400Pa snow & 2400Pa wind load

• High conversion efficiency through advanced manufacturing technology

• 10 years product warranty, 25 years linear performance warranty

• Anti-PID modules effectively reduce the loss in solar panel power output

• Anti salt mist corrosion & anti-ammonia corrosion test

• Rigorous quality control meeting the highest international standards

• High-transmittance low-iron tempered glass, strong aluminium frame using UV-resistant silicon

• ISO 9001:2008, ISO 14001:2004, OHSAS 18001

• IEC 61215, IEC 61730, safety class II, conformity to CE